FLOW PATTERN TESTER -500

Product Image

FLOW PATTERN TESTER -500

FPT500 is non-contaminating fog generator that can produce very high purity fog for airflow visualization test in clean rooms & high concentration of water aerosols (Atomized particle size 1-10μm on 80%) and which will leave no residue contaminants when droplet of water evaporates in side cleanroom. This product is widely accepted to Pharmaceutical, Healthcare and Semiconductor industries.


Features and Benefits :
 

•    Portable and exquisite.

•    Used for ISO-5 to ISO-8 in Cleanroom, vial tunnels, LAFW, BSC, Isolators, etc.

•    Very insignificant warm up time required i.e. <1 minute.

•    Easy to produce curtain-shaped fog by using fog wand which helps to check laminar air flow pattern by covering maximum area of HEPA filter at a time. 

•    We can use maximum Extendable flexible grooved milky white hosepipe of 10ft. 

•    Low noise i.e. ≤ 50dB 

•    Ultrapure foggers with absolute non-contamination. No emission of toxic gases. 

•    Cool Fog output.

•    No residual.

•    Fog is good controllability. 

•    Air Volume is adjustable.

•    Visual indicators for Airflow, Atomization & Low water level. 

•    Auto Atomization switch off / cut off if water level is low. 

•    Water tank volume : 5 Liters 

•    Water capacity Max. fill level : 3.5 Liters 

•    Fog medium Impedance : 16 to 64 MΩ Distilled Water or 

•    Filtered WFI (i.e. Water for Injection) 

•    Fog medium conductivity : 0.15 – 1.00 ms/cm 

•    Fog output rate : 0.95 m3/min 

•    Aerosol Size Distribution : 1 -10 μm 

•    Continual fogging times : 40 Minutes

•    Water Consumption : 25 to 70 ml/Min. 

•    Material of Construction : Stainless Steel SS304 
 

PARAMETERFPT 500FPT 700
External Power SupplyAC220V 50HzAC220V 50Hz
Water Tank Volume 5 Liters7 Liters
Water capacity optimum level 25 Liters45 Liters
Water capacity Max. fill level3.5 Liters5 Liters
Dimension350mmx230mmx330mm50cmx26cmx34cm
Weight of Empty FPT9.2KG20KG(without water)
Input VoltageDC 45VDC 45V
Rated Power Consumption216 W216 W
Fog medium impedance16 to 640 Distilled water or Filtered WFI16 to 640 Distilled water or Filtered WFI
Fog medium conductivity0.15-1.00ms/cm0.15-1.00ms/cm
Fog output rate0.95m³/min0.95m³/min
Aerosol Size Distribution1-10μm1-10μm
Continual fogging times30 minutes25 minutes
Water Consumption25 to 30ml/min200 to 300ml/min
Material of ConstructionStainless Steel SS304Stainless Steel SS304

 

 

 

We are here to answer your questions 24/7

Enquire Now

Get a Quote